Product data

ManualsBrandsWhite ManualsPrint & Scan625

Trademarked names are used throughout this document. Rather than place a symbol at each occurrence, trademarked names are

designated with initial capitalization. Inclusion or exclusion is not a judgment on the validity or legal status of the term.

Release Notes

Illustra 625 PTZ Camera

Firmware Version

Product Data

1.0.2

(1.0.2.A491AA929)

Visit the IP Cameras section of our web site –

www.americandynamics.net – to download

datasheets and other documentation in PDF

format.

September, 2013

Note

In case of discrepancy, the information in this document supersedes the information in any document

referenced herein.

8200-0999-09 C0

Summary of content (15 pages)

PAGE 1
Release Notes Illustra 625 PTZ Camera Firmware Version 1.0.2 (1.0.2.A491AA929) Product Data Visit the IP Cameras section of our web site – www.americandynamics.net – to download datasheets and other documentation in PDF format. September, 2013 Note In case of discrepancy, the information in this document supersedes the information in any document referenced herein. © 2013 Tyco Security Products. All rights reserved. 8200-0999-09 C0 Trademarked names are used throughout this document.
PAGE 2
Illustra 625 PTZ Camera v1.0.2 Release Notes Table of Contents Table of Contents ........................................................................................................................................ 2 What’s in This Release ............................................................................................................................... 3 Introduction..............................................................................................................................
PAGE 3
Illustra 625 PTZ Camera v1.0.2 Release Notes What’s in This Release Introduction This document contains a summary of the key features and known limitations of Illustra 625 PTZ Camera (i625PTZ) firmware release 1.0.2. This is the new firmware release for the new Illustra 625 PTZ camera. This firmware release adds support for the optional Illustra 625 PTZ Feature Plus functionality consisting of audio, external alarms and SD card event buffering.
PAGE 4
Illustra 625 PTZ Camera v1.0.
PAGE 5
Illustra 625 PTZ Camera v1.0.2 Release Notes Firmware Upgrade The Illustra 625 PTZ Camera can be upgraded via the camera web GUI or by using Illustra Connect. Upgrade Camera Firmware via the Web GUI Note: All existing camera settings are maintained when the firmware is upgraded. Procedure: Upgrade Camera Firmware via the Web GUI 1. Using Internet Explorer connect to the camera via the IP Address and login to the Web GUI. 2. Select Setup from the web banner to access the setup menus. 3.
PAGE 6
Illustra 625 PTZ Camera v1.0.2 Release Notes Features Key Features                       2 MP with dual streams at 1080p 30ips resolution Integration with American Dynamics VideoEdge NVR, VideoEdge Hybrid, victor Unified Client and HDVR v2.1 & 2.2 (Feature Plus supported on HDVR 2.2 onwards). Illustra API v3.0 Illustra Connect v1.1.0 ONVIF 2.
PAGE 7
Illustra 625 PTZ Camera v1.0.2 Release Notes MicroSD Card A MicroSD card pre-formatted with FAT32 to a maximum size of 32GB is supported Video Streaming Illustra 625 PTZ supports H.264 and MJPEG codec with resolution of up to 1920x1080 and 30ips.       Codecs supported: H.264 (High Profile) or MJPEG Resolutions supported: 1920x1080,1600x900,1280x720,1024x576,960x540,800x450,640x360,480x270,320x180 or 160x90 MJPEG Quality: 1 to 100 H.
PAGE 8
Illustra 625 PTZ Camera v1.0.2 Release Notes MJPEG usage consideration MJPEG video does not use any temporal compression but only use spatial compression making its bandwidth requirements much greater than H264.
PAGE 9
Illustra 625 PTZ Camera v1.0.2 Release Notes Illustra 625 PTZ Camera Feature Plus   American Dynamics VideoEdge NVR/ VideoEdge Hybrid version 4.3 with camera pack 4.3.0.1046 or later. American Dynamics VideoEdge NVR/ VideoEdge Hybrid version 4.4 will require a handler upgrade Refer to the American Dynamics VideoEdge Camera Handler Release Notes for integration information with upcoming releases.
PAGE 10
Illustra 625 PTZ Camera v1.0.2 Release Notes 3. Deselect the ONVIF Discovery Mode check box to disable the feature. Picture Settings     On reboot the camera will return to the last “Save Picture Settings” On power reset the camera will return to the last “Save Picture Settings” If “Save Picture Settings” has never been used, the saved settings are equivalent to Defaults.
PAGE 11
Illustra 625 PTZ Camera v1.0.2 Release Notes Set North Position Before configuring PTZ camera settings such as presets, privacy zones, areas or patterns it is essential to first set the North position on the dome. OSD OSD has been disabled for all dynamic overlays including pattern recording progress bar. Only time and camera name are available in 1.0.0.x. Feature affects: Area, Set North and Pattern Recording.
PAGE 12
Illustra 625 PTZ Camera v1.0.2 Release Notes Known Limitations and Issues PRODUCT Description Suggested Work-Around This firmware update is not backwards compatible. Once the firmware version 1.0.2 has been installed it will not be possible to downgrade to firmware version 1.0.0 or 1.0.1.
PAGE 13
Illustra 625 PTZ Camera v1.0.2 Release Notes PRODUCT Description Suggested Work-Around During PTZ movement’s user may experience image oscillation on some part of the image for a small period (approx 5 seconds). Translated user guides have not yet been updated to reflect changes in the new software release. Camera without a MicroSD card inserted is not sending emails when SMTP has been enabled and an alarm triggered.
PAGE 14
Illustra 625 PTZ Camera v1.0.2 Release Notes Technical Tips PRODUCT Description Suggested Work-Around North Position: The north position defines the absolute 0 degree pan reference. Changing the North position will change the location of Presets, Privacy Zones, Area and recorded patterns. Before configuring PTZ camera settings such as presets, privacy zones, areas or patterns it is essential to first set the North position on the dome.
PAGE 15
Illustra 625 PTZ Camera v1.0.2 Release Notes Contact Information If you have any questions regarding these release notes, please contact American Dynamics Technical Services at: Toll Free: 800-507-6268, Option 2 International: 561-912-6259, Option 2 Alternative Number: 800-392-2873 Fax: 450-444-2029 Hours: 08:00 – 20:00 EST Email: adtechservices@tycoint.com Website: www.americandynamics.