Install Instructions

INSTALLATION (cont’d)
Do not install the wall mounting plate and subbase at the
same time. The thermostat will not operate properly if both
the wall mounting plate and the subbase are installed.
NOTE
OFF
FAN
AUTO ON
SYSTEM
COOL HEAT
Thermostat
Thermostat
Subbase*
Wall Mounting
Plate*
Wall
Figure 3. Mounting thermostat to wall
No. 6 X 1” pan-head screws
(supplied with thermostat)
Wall Cover Plate
*Do not use both subbase and wall
mounting plate – see note, above.
No. 6 X 1” pan-head screws
(supplied with thermostat)
Wall Cover Plate
Junction Box
Adaptor Plate
Figure 2. Mounting thermostat to vertical junction box
Locate and drill two
clearance holes in wall
6-32 X
3
⁄ 4 ” flat-head
machine screws
OFF
FAN
AUTO ON
SYSTEM
COOL HEAT
Thermostat
Thermostat
Subbase*
Wall Mounting
Plate*
6-32 X
3
⁄ 4 ” flat-head
machine screws
*Do not use both subbase and wall
mounting plate – see note, above.
6-32 X
3
⁄ 4 ” flat-head
machine screws
When installing the wall cover plate and thermostat di-
rectly to the wall, use the pointed screws supplied with the
thermostat.
NOTE