Product Overview

Valves Options
The series includes several piping options; sweat or NPT bodies, inverted
flare, and flare fitting end connections for the standard copper tubing.
The zone valves are direct replacements for competitive
models from Honeywell and Erie.
SELECTION CHART
SPECIFICATIONS
• 24 Vac input voltage
• 50/60 Hz
•18 leads
• 3.5 Cv flow capacity rating
•Manual Lever
• 20 PSI close-off pressure
• 142 PSI maximum pressure
White-Rodgers
Hydronic Zone Valves
VALVE BODY AND CRANK ARM
ASSEMBLIES MADE FROM ONE-PIECE
CAST BRASS CONSTRUCTION
Zone valves are manufactured
in an ISO 9001 certified facility.
THIN WALL SWEAT BODY
(SWEAT SERIES ONLY)
FOR EASY SOLDER
EDPM SWING-TYPE BALL
VALVE RESISTS UP TO 230ºF
DURABLE PRECISE 14-GAUGE
BRASS GEARS PRODUCED BY
SWISS WATCH MANUFACTURER
MANUAL LEVER ON
MOST VALVES
EXCEPT NORMALLY
OPEN ONES
LEAFLET AND SCREW
MOUNTING FOR EASY
MOTOR REPLACEMENT
Long Life
White-Rodgers zone valves are designed for 2-way
straight through positioning with return spring for
hydronic systems. The return spring feature provides
for a fail-safe position and is made of stainless steel
for longer life. The plastic moulded zone valve cover
provides extra protection for the electrical components
from excess moisture or moisture caused by splashing.
The zone valves are powered by an electric, synchronous
motor for longer life and have been riveted to a one-
piece anodized steel motor bracket. The motor can
assume two operating positions depending on whether
the motor is activated or not. This type of two-position
(on-off) control of fluid flow can be utilized in a variety of
heating and cooling applications. Wiring connections to
the motor are made with an 18 5-conductor, 18-gauge,
and an SJ-type rubber cable with integral strain relief and
3 back stripped ends.
Physical Features
The valve body and crank arm assemblies are each made from one-piece
cast brass construction. The casting eliminates distortion from heat,
over-tightening, and years of operation. The gears are also made from
heavy 14-gauge brass for durable, precise construction. The valve
assembly utilizes a recessed “O” ring, which provides a positive seal.
Trust worthy
White-Rodgers zone valves have a swing-type ball valve made from
EPDM (Ethylene Propylene Polymer) material. EPDM enables the zone
valve to resist temperatures up to 230ºF. The swing-type style is
designed to rotate, which causes the ball plug to seat on a different
section of its surface on each closing, meaning less wear on the valve.
The raised ball seat ensures there is a positive valve closure and the ball
surface wears evenly.
A CONTRACTOR’S BEST FRIEND
ZONE VALVES NOMENCLATURE
13 V16 - 101
Zone Valve
Pipe Type:
V– Inverted Flare
F– Flare
N– National Pipe Thread
S– Sweat
Pipe Size:
100 – 3/8"
101
– 1/2"
102
– 3/4"
103
– 1"
Operation:
05 – Normally Open
06 – Normally Open with auxiliary
15 – Normally Closed
16 – Normally Closed with auxiliary
*with (2) 3/4 sweat adaptors
**valves are 7.0 Cv. Honeywell and Erie valves are 8.0 Cv.
EASY MOTOR
WIRES CONNECTION
Model
Number
Replaces
13V16 –101
13V06 –101
13F05 –100
13F15 –100
13FA15 –100
13F16 –100
13S16 –101
13S16 –102
13S05 –102
13S16 –103
13N05 –101
De-energized
Position
NC
NC
NC
NC
NC
NC
NC
NO
NC
NC
NO
NO
NO
NC
Auxiliary
Switch
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
No
No
No
Yes
13N16 –101
13N16 –102
Pipe
Connection
NPT
Flare
Flare
Flare
Sweat
Sweat
Sweat
Sweat
Sweat
Inverted Flare
Inverted Flare
NPT
NPT
Tubing
Size
(I.D. Pipe)
1/2
1
1/2
3/8
3/8
3/8
3/8
1/2
3/4
3/4
3/4
1/2
1/2
3/4
3/4
VT234G13A02A
VT2343G23A02A
VT2253G23A020
VT2253G13A020
VT2253G13A0200F
VT2253G13A02A
VT2213G13A02A
VT2313G13A02A
VT2313G23A02A
VT2415G13A02A
VT2417G13A02A**
VT2223G13A02A
VT2223G23A020
VT2323G13A02A
NC
Yes
13N16 –103 NPT
1
VT2427G13A02A
V8043E1129
V8043A1003
V8043C1033
V8043G1133
V8043E1004
V8043E1012
V8043B1027
V8043E1020
13SH16 –103**
NC
Yes
Sweat
1
V8043E1079
13SH16 –102**
NC
Yes
Sweat
V8043E1145
13FA05 –100
NO
No
Flare
3/8
VT2253G23A0200F
V8043D1080
V8043D1197
Yes
13NH16 –102** NPT
NC
Yes
13NH16 –103** NPT
1