SAFETY DATA SHEET W31104510 Section 1. Identification Product name Product code Other means of identification : WHITE LIGHTNING® SILICONE ULTRA Window & Door Sealant Aluminum : W31104510 : Not available. Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Not applicable.
Section 2. Hazards identification Prevention Response Storage Disposal Supplemental label elements Hazards not otherwise classified : Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves. Wear eye or face protection. Wear protective clothing. Do not breathe vapor. Wash hands thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace. : Get medical attention if you feel unwell.
Section 4. First aid measures Ingestion : Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel.
Section 5. Fire-fighting measures Extinguishing media Suitable extinguishing media : Use an extinguishing agent suitable for the surrounding fire. Unsuitable extinguishing media : None known. Specific hazards arising from the chemical Hazardous thermal decomposition products Special protective actions for fire-fighters Special protective equipment for fire-fighters : In a fire or if heated, a pressure increase will occur and the container may burst.
Section 7. Handling and storage Precautions for safe handling Protective measures : Put on appropriate personal protective equipment (see Section 8). Persons with a history of skin sensitization problems should not be employed in any process in which this product is used. Avoid exposure - obtain special instructions before use. Avoid exposure during pregnancy. Do not handle until all safety precautions have been read and understood. Do not get in eyes or on skin or clothing. Do not breathe vapor or mist.
Section 8. Exposure controls/personal protection STEL: 0.2 mg/m³, (as Sn) 15 minutes. CA Quebec Provincial (Canada, 1/2014). Absorbed through skin. TWAEV: 0.1 mg/m³, (as Sn) 8 hours. STEV: 0.2 mg/m³, (as Sn) 15 minutes. CA Ontario Provincial (Canada, 7/2015). Absorbed through skin. TWA: 0.1 mg/m³, (as Sn) 8 hours. CA Saskatchewan Provincial (Canada, 7/2013). Absorbed through skin. STEL: 0.2 mg/m³, (measured as Sn) 15 minutes. TWA: 0.1 mg/m³, (measured as Sn) 8 hours.
Section 9. Physical and chemical properties Appearance Physical state : Liquid. Color : Not available. Odor Odor threshold pH : Not available. : Not available. Melting point : Not available. : Not available. Boiling point : 151°C (303.8°F) Flash point : Closed cup: 94°C (201.2°F) [Pensky-Martens Closed Cup] Evaporation rate : 0.24 (butyl acetate = 1) Flammability (solid, gas) : Not available.
Section 11.
Information on the likely routes of exposure : Not available. Potential acute health effects Eye contact : Causes serious eye irritation. Inhalation : No known significant effects or critical hazards. Skin contact : May cause an allergic skin reaction. Ingestion : No known significant effects or critical hazards.
Route ATE value Oral 31727.3 mg/kg Section 12. Ecological information Toxicity Product/ingredient name Result Methyl Ethyl Ketoxime Dibutyltin Dilaurate Acute LC50 843000 µg/l Fresh water Chronic EC10 >2 mg/l Fresh water Octamethylcyclotetrasiloxane Species Exposure Fish - Pimephales promelas Algae - Scenedesmus subspicatus Chronic NOEC 1.7 to 15 µg/l Fresh water Daphnia - Daphnia magna Chronic NOEC 4.
Section 14. Transport information DOT Classification TDG Classification Mexico Classification IATA IMDG UN number Not regulated. Not regulated. Not regulated. Not regulated. Not regulated. UN proper shipping name - - - - - Transport hazard class(es) - - - Packing group - - - - - Environmental hazards No. No. No. No. No.
Section 16. Other information Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks Although HMIS® ratings are not required on SDSs under 29 CFR 1910. 1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA). HMIS® materials may be purchased exclusively from J. J.
Date of issue/Date of revision : 6/4/2016 Date of previous issue : 6/3/2016 Version :2 13/13