User's Manual

OPERATION
Factory Default/Settings Mode
The Min and Max settings from the factory are set to the
following limits:
Follow the steps below to change the settings to match your
vehicle’s requirements:
1. In standby mode, press and hold the Middle button and
release it after the beep.
2. Press the Middle button repeatedly to scroll through the
different parameters.
3. Press the Left or Right button to adjust the desired settings.
4. Press and hold the Middle button for 3 seconds then release
after the beep to save the settings.
5. If no action is taken for 1 minute, the system will return to
the standby mode without making an
y changes.
6. Pages 9 and 10 show how to change each setting to match
your vehicle.
8
High Pressure: 44PSI (3.0 BAR)
Low Pressure: 29PSI (2.0 BAR)
High Temperature: 158
°
F (70
°
C)
tirescout.qxp 3/12/2012 10:34 AM Page 9