User's Manual

INSTALLATION

Monitor Installation

1. Secure the monitor inside the vehicle cabin without

obstructing the driver's vision of the road.

2. Place the monitor on the dashboard using the Dash Pad or

the double-sided tape. If using the double sided tape make

sure that the area choosen is clean and dry. Clean with

isopropyl alcohol, if necessary, to remove any waxes or

polishes.

3. Plug the power adapter into the cigarette lighter; turn the

monitor on to fully charge.

(It must be charged more than 2.5 hours the first time).

CAUTION:

1. The monitor should be installed inside the vehicle where it

does not affect normal driving.

2. The monitor should be securely placed to avoid falling off

during driving.

3. After the system is installed correctly, the driver does not

need to check the monitor while driving. Alerts will be

issued when abnormal conditions are found in the tires.

tirescout.qxp 3/12/2012 10:34 AM Page 7