User's Manual

Problem: Monitor will not power on.
• Press and hold the Left Button until the unit beeps.
• May need to be charged. Plug in the power cord to power
the monitor and charge it.
• Make sure that lighter socket is functional.
Problem: No Pressure display from a sensor.
• Vehicle must be moving for sensors to transmit.
• After vehicle has moved it may take up to 5 minutes for the
sensor to transmit the tire information.
• Possible bad sensor battery. Replace battery.
TROUBLESHOOTING/ FCC INFO
FCC INFORMATION
FCC ID: HSXTP01
This device complies with part 15 of the FCC Rules. Operation is
subject to the following conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Important: FCC requirements state that changes or
modifications not expressly approved by Whistler could void the
user’s authority to operate the equipment.
16
tirescout.qxp 3/12/2012 10:34 AM Page 17