User's Manual

OPERATION
Monitor Display Information
Pressure Display
The monitor displays the pressure of 4 tires. If the system
senses high pressure, low pressure, or a puncture, an alert will
be given and the display will flash a warning icon indicating the
affected tire and that tires information.
Temperature Display:
Pressing the Middle button once will display the temperature
reading for 10 seconds. The monitor will display in the
sequence of the following diagram by each press.
Monitor Sleep Mode
If the vehicle does not move for 5 minutes or more, the
monitor will stop sensing data and turn off (enter sleep mode)
to save power. The monitor will power on when it detects
movement of the vehicle. Pressing any button or touching the
monitor will also power the monitor on again.
Backlighting
The monitor has a built in motion sensor. The backlight only
turns on when it detects the vehicle is in motion. The monitor
will be in sleep mode to conserve battery life if the motion
sensor detects the vehicle is motionless for 5 minutes. It will
turn on again when it detects the vehicle is in motion.
13
Temperature shown
Pressure shown
tirescout.qxp 3/12/2012 10:34 AM Page 14