User's Manual

OPERATION

Factory Default/Settings Mode - continued

Note: To restore the factory default settings follow these

steps:

1. Turn off the monitor

2. Press and hold the Left button to turn on the monitor then

immediately press and hold the Middle button for 3 seconds.

3. Release the Middle button after the unit beeps together

with the flashing red light.

The factory default settings will be restored without changing

the sensor’s ID code (LF, RF, LR, RR, SP) information.

Adjusting the Alerts

Pressure Unit Setting

When "PSI" or "BAR" icon flash, press the Left or Right

buttons to select between PSI or BAR.

Temperature Unit Setting

When "F” or "C” icon flash, press the Left or Right buttons to

select between "F "or "C ".

Flash

tirescout.qxp 3/12/2012 10:34 AM Page 10