User's Manual

58
CONFIGURATION SE T TING
Configuration Settings (EZ S c an)
To access configuration settings, select Settings from
the main menu, and press  .
• Default Vals – Restores default settings.
• Simple Display – Limits displayed information.
• Default SL – Sets the default Scanlist.
• Priority Mode – Enables Priority mode.
• Priority Time – Time between priority scans.
• Enable Record – Turns on the record feature.
• Search Record – when active unit records
transmissions found while searching.
• G Atten Mode – Enables Global Attenuation.
• G Atten On – Activates Global Attenuation.
• Search Dg AGC – Applies Digital AGC to found
digital transmissions.
• G AGC Mode – Enables Global AGC.
• G AGC On – Activates Global AGC.
• Scan Sets Opt - Turns on Scan Set Feature.
• Sounds – Sets EZ Scan beeps and alert sounds.
• Alerts – Controls audio alerts.
• Key Beeps – Enables or disables key tones.
• Beep Volume – Sets key tone volume.
• Alert Volume – Object volume.
• Contrast – Sets the LCD contrast.
• LiteMode - Sets the backlight mode to On, Normal,
Key, Ignore or Stealth.
• LiteTime – Backlight duration.
• LiteLevel – Controls backlight brightness.
• Knob Dflt - Selects SQ or VOL.
• Knob T/out - Selects time from levels 1-10.
• Welcome Text 1-5 – Sets the text displayed on
five lines of the display when the scanner is first
turned on .
• Skip - Programmed to “lockout” will permanently
locks out an object when the SKIP button is pressed.
• Blink Time 1-2 – Controls the amount of time each
item is displayed.
• Show Radio ID – Displays the Radio ID for trunked
systems, if available. Tag Only.
DRAFT