User's Manual

22
MOUNT INS T ALL A TION
Desktop Operation
The supplied mounting bracket can serve as a desktop
stand when it is installed beneath the r adio . You may
also use the mounting bracket indoors to attach the
radio underneath a table or shelf by installing the
mounting bracket above the r adio .
Attach the three self-adhesive rubber feet to the
bottom of the mounting bracket in the spaces
pr ovided . The rubber feet help prevent sliding on
smooth surfaces, and will help prevent scr a t ching of
your desk or tabletop . Do not use the rubber feet if
you plan to attach the mounting bracket to a fixed
surface with scr ew s .
Attach the two self-adhesive rubber washers to the
inside of the mounting bracket sides, over the holes
that are used when attaching the bracket to the
scanner’s side holes . Be sure to align the holes in
the washer carefully with the holes in the moun ting
br acket . The rubber washers help protect the scanner ’ s
case from scr a t ches .
Slide the scanner carefully into the mounting bracket
assembly , and use the two provided knurled knobs t o
secure the scanner within the mounting br acket .
C onnec t the supplied AC power supply to your wall
outlet . C onnec t the coaxial power plug to the r adio .
NOTE: Plug the adapter into an easily accessible power
outlet location near the equipmen t .
DRAFT