User's Manual
Table Of Contents
37
SCANLISTS and SCAN
SE
T
S
Scanlists and Scan
S
ets
Scan Sets are an
exciting
new
feature
with the
WS1080 / WS1088. There are 20 Scan Sets
that work
in conjunction with
Scanlists
to provide
additional
scan object
selection capability and flexibility.
Each
Scan
Set contains a
list of all
200 normal Scanlists
plus
the
special Skywarn
Scanlist.
With
Scan Sets you can quickly select large groups
of
Scanlists
to
enable
or
disable, just
by
enabling
or
disabling
the
Scan Sets
that
contain
the
desired
groups
of
Scanlists, instead
of
individually
editing the list of
enabled Scanlists every
time
you
want to
change
the
group of
Scanlists you wish
to monitor.
For
example:
On Scanlist 01
you
decide
to put all of
City1.
On
Scanlist 02
you
decided
to put all of
City 2,
on Scanlist
03
you
decided
to put all of
City
3.
By
default all
Scanlists are enabled
for
Scan Set 01. The scanner
will
scan
all
these Scanlists even
though they
may
be out
of
range. You can program
other
Scan Sets
to have
certain Scanlists enabled
or
disabled
to
make
it easier
for you to
scan
only the
lists
you know
are
in range.
For example
you
can program
Scan Set 02
to enable
only
Scanlist 01
which
is City 1, and disable
all others.
You can program
Scan Set 03
to
enable
only Scanlist
02
which
is City 2, and disable
all
others,
etc.
This
way
instead
of
having disable each Scanlist
you
are
not
using,
you
can select
the
Scan Set
you
need,
which
you
have already programmed
for
a specific area.
This
would be
mostly beneficial
if you
had many
Scanlists
programmed
for different
locations
or departments.
Scanlists and Scan Sets
follow
this simple
rule:
If an object is mapped
to
an enabled Scanlist, AND,
that
Scanlist is enabled, AND,
that
Scanlist is a member
of an
enabled
Scan Set, THEN,
that
object
will
be scanned when
the
SEL
key is
pressed.
DRAFT