User's Manual

72
73
Advanced Settings
Advanced Settings
Priority Scan
Priority Scan operation is available for CONV and TGRP objects.
When Priority Scan is active, increased priority is given to objects that
have their Priority mode set to ON.
Turning Object Priority On or Off
When the scanner stops on the object while active, press PRI to select
Object Priority on or off.
or
Browse to an object in Manual Mode or Program Mode. Press PRI to
select Object Priority on or off.
or
1. Browse to an object in Program Mode.
2. Press EDIT, then CURR softkeys.
3. Press q to scroll to Priority.
4. Press t or u to select Priority On or Off.
The plD indicator in the object display will show lower case “p” for
Object Priority Off, and upper case “P” for Object Priority On.
Turning Priority Scan Mode On or Off
1. While the radio is scanning, press FUNC.
2. Press PRI to toggle Priority Scan On or Off.
Priority Scan status is shown in the main Scanning status display.
PRI indicates that Priority Scan mode is on, and pri indicates that
Priority Scan mode is off.