User's Manual

70
71
Scanner Memory
Loading a V-Scanner Folder to Main Memory
1. Press FUNC, then PROG to enter V-Scanner mode.
2. Press the Load softkey.
3. Press p or q to scroll to the desired V-Scanner folder, then press
the Load softkey.
4. The scanner will ask you to confirm that you wish to overwrite
the current contents of main memory. Press the YES softkey to
proceed, or the NO softkey to abort.
The data transfer takes approximately 4 seconds to complete.
Erasing V-Scanner Folders
1. Press FUNC, then PROG to enter V-Scanner mode.
2. Press the Eras softkey.
3. Press p or q to scroll to the desired V-Scanner folder, then press
the Eras softkey.
4. Press the YES softkey to delete current contents, or press the NO
softkey to abort.
Cloning
You can transfer the programmed data to and from another PRO-652
(or PRO-651) scanner using a connecting cable which has
1
/
8
-inch
stereo phone plugs on both ends (not supplied).
To clone the scanner data:
1. Turn on both scanners.
2. Connect the connecting cable to each scanner’s PC/IF jack.
3. Press PROG, then the
GLOB softkey to enter the Global Settings
menu.