User's Manual

Dedicated Searches

The following information is displayed for each trunking mode:

Trunked Mode Analysis Display

Motorola 3600

baud control

channel

qq% SID:ssss Stt

qq = decoding quality of the control channel data, SID = System

ID, and

S = Site Number

P25 9600 BPS

control channel

qq% Nnnn W:wwwww

Sys:sss Rrr Stt

qq = decoding quality of the control channel data, N = NAC, W =

WACN, SYS = System ID, R = RFSS, and S = Site Number

EDACS control

channel

qq% S:ss h/H s/S a/A

qq = decoding quality of the control channel data, S = Site ID,

h/H = not home site/is home site, s/S = not SCAT site/is SCAT

site, a/A = not Aux CC/is Aux CC

LTR home

repeater

HR:hh A–HH–GGG

HR = the home repeater number of the tuned frequency, A-

HH-GGG = the Area, Home Repeater and Group ID of the LTR

talkgroup

Motorola

analog voice

channel

VC: lsTGID–nnnnn

lsTGID = the decoded talkgroup ID data from the lowspeed data

stream

Note that the analog lowspeed data protocol does not provide

error correction, and some false “VC: lsTGID” readings should be

expected.

Tune LED

Tune LED can provide visual indication of signal strength using the

tri-color LED.

To activate the Tune LED:

1. Press PROG for Program Mode.

2. Press GLOB softkey.

3. Press q to select Tune LED:.

4. Press t or u to select Tune LED on or off.

5. Press the SAVE softkey to save your changes to the radio’s

conﬁguration memory.