User's Manual

48
49
Organizing Objects
To unlock a permanent lockout:
1. In Manual Mode or Program Mode, press p, q, t or u to
select an object.
2. Press FUNC, then L/OUT.
Change L/OUT Key Function
By default, the L/OUT key activates temporary lockout when
pressed. To change the L/OUT key to activate a permanent lockout
when pressed:
1. Press PROG to enter Program Mode.
2. Press GLOB softkey.
3. Press p or q to scroll to TLO=FUNC L/O:.
4. Press u and select YES to change the L/OUT button to be a
permanent lockout instead of a temporary lockout.
Search Lockout
Search lockout works with certain search objects, including LMIT
searches, some SRVC searches, and STLK objects. Frequency lockout
is used to lock out undesired frequencies that are found during
searches.
To apply search lockout during a search:
When scanner stops on the undesired frequency, press the
FrL/O
softkey.
To edit or clear the search lockout list:
1. Press PROG.
2. Press
GLOB softkey.
3. Scroll down to SRCH L/Outs: and press SEL.
4. Scroll to the frequencies you wish to remove from the lockout list
and press Del softkey to remove them from the list.