User's Manual

Organizing Objects

3. Press FIND softkey.

4. Press L/Out softkey. The scanner ﬁnds the ﬁrst locked out

object.

5. Press L/Out to toggle lockout status.

6. Press EXIT softkey when ﬁnished.

or Press EDIT softkey to edit object menu for the selected object.

or Press NEXT softkey to ﬁnd the next locked out object.

or Press MAN to begin monitoring the object in Manual Mode.

or Press PROG to exit FIND and execute programming tasks at the

selected object position.

To ﬁnd objects with a speciﬁed text string:

1. Press PROG to enter Program Mode.

2. Press

EDIT softkey.

3. Press FIND softkey.

4. Press Text softkey

5. Use the number keys to enter the text string you wish to search

for. Or press the Qtxt softkey to use QuickText in your ﬁnd text

screen. See “Appendix C: Text Entry and QuickText”Appendix C: Text Entry and QuickText” on page 115 for

information on entering text.

6. Press OK softkey to begin searching.

The radio will stop on any object where your text string is found

in the frequency, tag, or ID ﬁelds as described above.

7. Press the Exit softkey to cancel the FIND operation.

or Press EDIT softkey to edit object menu for the selected object.

or Press NEXT softkey to ﬁnd the next object.