User's Manual

42
Organizing Objects
43
Scan List 11-20
Press FUNC, then press a number key, i.e., press FUNC 3 to toggle
the status of Scan List 13.
Note: If you enable a Scan List that has no assigned objects, the
number for that Scan List will flash in the display while the scanner is
scanning.
From Global Settings Menu
1. Press PROG to enter Program Mode.
2. Press GLOB softkey.
3. Press p or q to scroll to Scan Lists: and press SEL.
4. Press p or q to scroll to the Scan List you wish to change then
press SEL.
5. Press u to scroll to Enabled: and press t or u to select On or
Off.
The asterisk (*) indicates Scan List enabled.
6. Press the Save softkey to save settings.
7. Press Save softkey again to confirm global changes and exit
GLOB menu.
NS (Not Scanned) Scan List
If you accidently store an object with no Scan List mappings, the
object will be placed in a special “NS” Scan List.
To access NS scan List:
1. Press PROG to enter Program Mode or press MAN to enter
Manual Mode.
2. Press t or u to scroll to the NS Scan List.
3. Press p or q to scroll through the NS objects.