User's Manual

51
To load a saved V-Scanner folder into main
memory:
1. Press FUNC and then PGM.
2. Press the Load softkey.
3. Use the 4-direction keypad to select a
V-Scanner folder.
4. Press the Load softkey. The scanner will ask you
to confirm that you wish to overwrite the current
contents of main memory.
NOTE: If you recall a configuration from a V-Scanner
storage folder and use it in main memory, any
changes you make while using the configuration will
not automatically be transferred to the configuration
data stored in the V-Scanner storage folder. You
must save your changes back to that folder location
if you want to preserve them for later use.
To erase a V-Scanner folder:
1. Press FUNC and then PGM
2. Press the Eras softkey.
3. Use the 4-direction keypad to select a
V-Scanner folder.
4. Press the Eras softkey. The scanner will ask you
to confirm that you wish to erase the selected
V-Scanner folder.