User's Manual

40
Service Search Object (SRVC)
A Service Search Object (SRVC) is optimized for
specific radio services across multiple frequency bands.
Because a SRVC object is assigned to a scan list, it
can be used to search while the radio is scanning. It
can also be used as a stand-alone search.
To create a new SRVC object:
1. Press PGM.
2. Press the NEW softkey.
3. Press the SRCH softkey.
4. Press the SRVC softkey.
5. Configure settings for the object. To restore the
default setting, press the Dflt softkey.
6. Name your search in the Tag field.
7. To search while scanning, assign the object to a
scan list.
8. Press the Save softkey.
To begin a Service search:
1. Press MAN.
2. Use the 4-direction keypad to navigate to the
SRVC object.
3. Press the SRCH softkey (not the SRCH key on
the keypad).
4. Press PSE to hold on a transmission. To resume,
press PSE again.
• Press the FrL/O softkey lock out a frequency.
• Press the STOR softkey to create a new CONV
object using the found frequency.
Change
Setting
Scroll