User's Manual

38
Limit Search Object (LMIT)
Because a LMIT object is assigned to a scan list, it
can be used to search while the radio is scanning. It
can also be used as a stand-alone search.
To create a new LMIT object:
1. Press PGM.
2. Press the NEW softkey.
3. Press the SRCH softkey.
4. Press the LMIT softkey.
5. Configure settings for the object. To restore
the default setting, press the Dflt softkey. Enter
the beginning ( FrLo) frequency then enter the
ending (FrHi) frequency.
6. Name your search in the Tag field.
7. To search while scanning, assign the object to a
scan list.
8. Press the Save softkey.
To begin a Limit search:
1. Press MAN.
2. Use the 4-direction keypad to navigate to the
LMIT object.
3. Press the SRCH softkey (not SRCH on the
keypad).
4. Press PSE to hold on a transmission. To resume,
press PSE again.
• Press the FrL/O softkey lock out a frequency.
• Press the STOR softkey to create a new CONV
object using the found frequency.
Change
Setting
Scroll