User's Manual
7
Connecting a Speaker or Headphones
You can plug an amplied speaker or headphones
(not supplied) with Çinch (3.5 mm) mini-plug into the
HEADPHONE jack on the top of the scanner. This
automatically disconnects the internal speaker.
Note: Use an amplied speaker with this scanner. Non-
amplied speakers do not provide sucient volume for
comfortable listening.
Listening Safely
To protect your hearing, follow these guidelines:
• Do not listen at high volume levels. Extended high-
volume listening can lead to permanent hearing loss.
• Set the volume to the lowest setting. Then turn
on your audio device and adjust the volume to a
comfortable level.
• Avoid increasing the volume. Your ears will adapt
to the volume level, so a level that does not cause
discomfort could still damage your hearing.
Using the Belt Clip
You can use the belt clip attached to the back of the scanner
for hands-free carrying when you are on the go. Slide the
belt clip over your belt or waistband. To remove the belt clip,
gently lift up the retaining catch at the top of the belt clip
from the back of radio and slide the clip upward.