User's Manual

15
Programming with a Computer
You can upload or download programmed data to or
from a PC using a USB cable available from your local
RadioShack store or www.RadioShack.com.
The application software is available online. Use a search
engine to nd “scanner programming software.” Follow
instructions in the software package to upload and
download data.
Cloning Programmed Data
You can transfer the programmed data to and from a
PRO-649 scanner using an optional connecting cable
with Ç-inch (3.5mm) stereo phone plugs on both ends
(available from your local RadioShack store or
www.RadioShack.com).
1.
Turn on both scanners.
2. Connect the connecting cable to each scanner’s PC/
IF jack. CLOnE and UP to SEnd appears.
3.
Press e on the host scanner.
4.
SEndInG appears at the host scanner.
To exit clone mode after the data transfer is complete,
remove the cable.
No ConnEct appears if you try to connect to another
model scanner. The PRO-649 does not clone with other
scanner models.