User's Manual
14
Conguring Your Scanner
Preprogrammed Frequencies
Your scanner includes 153 preprogrammed frequencies,
which you can load into Channels 1 to 153. For a list of
these frequencies, see “Preprogrammed Frequency List”
on page 26.
To load the preprogrammed frequencies:
1.
Turn o the scanner and then turn it on again.
2. While WELCOME message appears, press PGM.
3.
Load –Fr– appears, then YES––Ent and No––CLEAr
appear alternately.
4.
Press ENT to load frequencies or CLEAR to cancel.
Programming Channels
If you do not have a list of frequencies in your area, refer
to an online resource such as www.radioreference.com.
1.
Press PGM. PGM appears.
2.
Enter the channel number
(1–200) where you want to
store a frequency,
3.
Press PGM again.
4.
Use the number keys to enter
the frequency,
5.
Press ENT.
6.
To program the next channel
in sequence, press PGM and
repeat Steps 4 and 5.
• Your scanner automatically rounds down to the
closest valid frequency. For example, if you enter
151.473, your scanner rounds it to 151.470.
• If Error appears and the scanner beeps three times
when you press ENT, start again from Step 2.
• If the frequency is already stored in another channel,
the scanner beeps three times and displays - d U P L-
(duplicate) and the lowest channel number where
the frequency is already stored. Press
TUNE/CLEAR to cancel. Press ENT if you still want
to store the frequency.
1,3,6 5
2, 4