User's Manual

ASSEMBLY / INSTALLATION

The camera angle should be adjusted to provide an optimal

view of objects behind the vehicle.

15. Adjust the camera angle as required:

• To adjust the camera angle, tilt the camera to the correct

angle.

• The camera should be adjusted to a horizontal position

relative to the ground, so as to provide optimal view of

objects behind the vehicle.

• Carefully tighten the 2 screws ½ turn to prevent the

camera angle from moving during vibrations from driving.

16. Find a mounting surface inside the vehicle for the monitor

where it can be easily seen, and does not obstruct your

vision when driving.

NOTE: To maximize the effectiveness of the suction mount,

the mounting location surface temperature should be between

50° and 100°F. Avoid application below 50°F.

NOTE: Before permanently mounting the monitor, test the

reception of the camera signal in several selected locations

within easy reach as one may have better reception than

another. If mounting to the dashboard, the dash disk must

be used to ensure a smooth surface for the suction cup to

attach.