User's Manual

11. Reinsert the 2 short machine screws into the 2 holes if

these are not used to attach to your vehicle, insert the

machine nuts, then tighten.

12. If needed, 2 cushions are provided to protect your

vehicle. Attach to the back of the spacers containing the

machine nuts.

13. Connect the solar panel connectors to the mating

connectors from the main camera housing and place

the tie wrap adhesive pads as shown. Use 2 tie wraps to

neatly hold the cables in place and cut the excess length

of the tie wrap if desired.

14. Attach the assembly to the vehicle with the appropriate

license plate mounting screws for your vehicle type.

NOTE: Domestic and Import license plate screws are included

and should be compatible with the vast majority of vehicles.

Should your vehicle require a special diameter or thread,

please consult your dealer.

ASSEMBLY / INSTALLATION