User's Manual

ASSEMBLY / INSTALLATION

5. With the solar mounts centrally positioned, apply pressure

to set the adhesive tape.

6. Peel the backing from the adhesive strips on the camera

base and carefully slide onto the long edge of the license

plate assembly positioned centrally between the license

plate mounting holes.

7. Remove the 2 short machine screws and nuts used earlier

and set aside.

8. Apply the 4 adhesive disks to the flat side on each of the

4 spacers.

9. Peel the backing from the adhesive disks and apply one

spacer over each license plate mounting holes.

10. Apply pressure to set the adhesive tape.