User's Manual

MONITOR SETTINGS

Brightness/Contrast/Color Settings are similar. Take Brightness

as an example, when Brightness is chosen, press or on

the interface to adjust the brightness as shown above:

Select “Image Rotation”, and then touch the button to

rotate or mirror the image. (It is best to have a video image

displayed when making this selection).

Select “Code Pairing”, and touch the button to enter

Code Pairing Mode; then, power on the camera by connecting

the solar cell cables to finish the Code Pairing.

NOTE: When it’s connected with the receiver for the first

time, the Code Pairing operation is required. Please select

the option “Code Pairing” from the receiver, and it will

reveal “PAIR ICON”. Then, please connect the transmitter

with solar panels, and the transmitter will enter Code Pairing

mode. After the Code Pairing operation, “OK” will appear on

PAIR ICON of the receiver to indicate the successful pairing.

In this case, the receiver can receive corresponding image

information.

Select “Software Information”, and touch the button to

display the software version information.