Product Warranty

Page 2Rev-091812
Product Warranty Information
7. This limited warranty is void if the factory applied serial number has been altered or removed from the
Product.
8. This limited warranty is voided if installed in an enclosure of insucient design that does not follow the
Product installation requirements stated herein and in the owner’s manual.
9. Removing the rivets from the Product’s unit housing without prior authorization from WhisperKOOL voids
this limited warranty.
10. The End User must rst contact WhisperKOOL Customer Service by telephone (at 1-800-343-9463) prior to
attempting service on any Product still under the limited warranty; else the limited warranty is voided.
11. This limited warranty does not cover Product being concealed by, but not limited to, vegetation, fabric,
shelving, mud, snow, or dirt. Product must not be painted or limited warranty will be void.
12. This limited warranty does not cover exposure to corroding environments such as, but not limited to, pe-
troleum and gasoline products, cleaning solvents, caustic pool chemicals, and marine air.
13. This limited warranty does not cover any cause not relating to Product defect.
14. THE REPAIR OR REPLACEMENT OF THE PRODUCT AS PROVIDED UNDER THIS LIMITED WARRANTY IS THE
EXCLUSIVE REMEDY OF YOU, THE END USER, AS WELL AS ANYONE ELSE IN THE CHAIN OF TITLE OF THE
PRODUCT, DOES NOT START A NEW LIMITED WARRANTY TIME PERIOD, AND IS IN LIEU OF ALL OTHER WAR-
RANTIES (EXPRESS OR IMPLIED) WITH REGARD TO THE PRODUCT. IN NO EVENT SHALL WHISPERKOOL BE
LIABLE FOR INCIDENTAL, CONSEQUENTIAL, SPECIAL OR CONTINGENT DAMAGES FOR BREACH OF ANY EX-
PRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXPRESSLY DISCLAIMED. Some states do not allow
the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty
gives you specic legal rights, and you may have other rights, which vary from state to state.
15. Failure of the End User to comply with all of the Product Installation Requirements, Maintenance Require-
ments and End User Requirements may, at WhisperKOOLs sole discretion, void this limited warranty.
16. No one has any authority to add to or vary the limited warranty on this Product.
3. Product Installation Requirements:
A. Prior to installing a WhisperKOOL Product, the End User must read the WhisperKOOL Owners Manual and there-
after the End User must follow the required installation, use and maintenance procedures set forth by Whis-
perKOOL in WhisperKOOLs Owner’s Manual. The Owners Manual is shipped with each Product and if another
copy is needed, replacement copies can be downloaded from WhisperKOOLs website (www.whisperkool.com) or
by contacting WhisperKOOL directly for a new copy of the Owners Manual.
B. It is highly recommended that the End User obtain the assistance of a wine storage professional.
C. Failing to address all of the variables associated with proper installation will cause the Product to operate incor-
rectly and limit both the Products ability to cool and the longevity of the Product itself.
D. The End User is responsible for all risks and costs of installation of the Product, including but not limited to all la-
bor costs as well as cost of any additional parts required for the proper and complete installation of the Product.
The End User is responsible for all risks and costs of removing the Product if limited warranty work is required.
E. The Product cannot operate at its optimum capacity if airow is constricted by ducting or venting the exhaust
side of the Product into a location with inadequate ventilation.
4. Maintenance Requirements
It is the End Users responsibility to clean o any accumulated dust, lint, or other debris from the front and rear
intake grills; failure to do this on a regular basis will restrict the airow and may aect the Products ability to func-
tion properly. Periodically cleaning the Product’s vents will help assure maximum cooling eciency. The drain tube
must also be checked and kept clean and free of debris and mold to maintain proper performance.
Mold is a natural living organism in the environment. It exists in the air in the form of microscopic spores that move
in and out of buildings through doors, windows, vents, HVAC systems and anywhere else that air enters. Once it is
discovered, mold must be addressed quickly and appropriately. Delayed or improper treatment of mold issues can