Manual
Page 4 | 1-800-343-9463
MSP 090517
Documentation bag:
• Mini Split Version 3 owner’s manual
• Mini Split Version 3 technician’s manual
• R-134a split system warranty checklist
Please leave the unit in its original box until you are ready for installation. This will allow you to move the product safely without
damaging it. When you are ready to remove the product from the box, refer to the installation instructions.
TIP: Save your box and all packaging materials. They provide the only safe means of transporting/shipping the unit.
(1) Platinum Mini Split evaporator unit (fan coil unit)
Condensing Unit Box:
(1) Condensing unit
RECEIVING & INSPECTING THE SYSTEM
Evaporator Unit (Fan Coil Unit) Box:
Upon receiving your WhisperKOOL unit:
• Use caution when lifting and check package for damage.
• Lift only at the designated hand-hold locations on the shipping container, or fully support the unit from underneath. A
shipment may include one or more boxes containing accessories.
• Before opening the container, inspect the packaging for any obvious signs of damage or mishandling.
• Write any discrepancy or visual damage on the bill of lading before signing.
• Allow the condensing unit to sit for 24 hours prior to start-up. The condensing unit can be placed in the installation
location, piped and evacuated during this time.
Note: WhisperKOOL units are manufactured in the USA and tested prior to shipment.
• Review the packing slip to verify contents
• Check the model number to ensure it is correct.
• Check that all factory options ordered are listed.
If any items listed on the packing slip do not match your order information,
contact WhisperKOOL Customer Service immediately.
Check all shipped boxes for the following contents:
Evaporator installation hardware bag:
• (2) ½” x ½” nylon barbed tting
• (1) ½” barbed tee
• (1) Double-D strain relief
• (4) ¾” adhesive cable tie mounts
• (2) Small cable ties
• (4) #8 x 1¾” hex-head screws
KDT Plus hardware bag:
• (1) ⁄” OD grommet
• (2) ½” nylon hole plug
• (4) #6 x 1” Phillips zinc Type A screw
• (4) 8-10 x ⁄” blue plastic screw anchor
Accessory kit bag:
• Retractable bottle probe
• KDT Plus display cable (50 feet)
• KDT Plus wall mount bracket assembly
• KDT Plus ush mount bracket assembly
• KDT Plus display assembly
• Flush mount template
• Evaporator installation hardware bag
• KDT Plus hardware bag
Condensing unit accessory kit:
• (1) Filter drier
• (1) Sight glass