System information

www.whisperkool.com • 1-800-343-9463
Note: For the equipment warranty to be valid certain installation piping and start up procedures are required.
WhisperKOOL procedures are expected to be followed and completed by the installing contractor and/or certied
HVAC/R service tech. The tech shall be required to be equipped with the proper tools of the trade including: refrigerant
134a, brazing equipment, dry Nitrogen, an accurate manifold gauge set (digital preferred), plus a four valve
manifold set for evacuation, digital micron gauge, digital scale, deep vacuum pump, accurate digital thermometers
and digital psychrometer. Without the proper equipment, a professional job cannot be accomplished. Evidence of
the certied tech’s, NATE# or other certication is required. Certied service tech acknowledges compliance with the
above by initialing the appropriate spaces below and lling blank spaces with data observed.
VERIFICATION AND OPERATIONAL DOCUMENTATION
for Warranty Registration
System Information
Model Number: Serial Number:
Condensing Unit: Evaporator Unit:
Installer Information
Company:
Address: Technician Name (print):
City: Certication ID Number:
State: Zip: Certication Source (e.g. NATE):
Company Phone: Technician Phone:
Company Email: Technician Email:
IMPORTANT:
DOCUMENT MUST BE COMPLETED AND RETURNED TO
ACTIVATE WARRANTY
The Coolest Thing in Wine Storage