Owner's Manual

Page 4 | 1-800-343-9463
WK 2500 081319
LIQUID MEASURING THERMOMETER
By measuring the temperature of the liquid, the temperature reading will be consistent and the unit will only run
when it needs to.
To Install the Thermostat:
1. Fill an empty wine bottle to its neck with room temperature water.
2. Press bottle probe securely into bottle.
3. Place the bottle with probe into a level rack space. Avoid pulling too much on the probe cord as it may become
disconnected, which would lead to inaccurate temperature readings.
The WhisperKOOL system is based on the temperature of the wine (It is ideal to place the probed bottle
midway in the racking, so that it is not near cold supply air). Do not be misled by ambient temperatures
that are read from the outside of the cabinet. The air temperature in the cabinet will be cooler than the
liquid temperature of the wine while it’s coming to optimum balanced temperature.