PVC Liner for Litter-Robot 3 Open Air Globe Assembly - User Manual

20. Once the Globe Liner is in place, work any slack around the channel until there are no gaps and it rests
evenly.
21. Place the two new foam strips provided. Adhere the first one to the plastic Globe, and the second one
overlapping the plastic and the Globe Liner (Fig. 10).
22. Replace the top half of the Globe. Make sure the Globe Liner stays secure in its channel and that the foam
is completely hidden. Once in place, if you can see the foam strips, reposition the foam and/or upper Globe
until no foam is visible (Fig. 11).
23. Use a Phillips screwdriver to replace the 8 screws you removed in Step 7 (Fig. 12).
24. Replace screw caps (Fig. 13).
25. Reassemble the Litter-Robot and power on.
Fig. 10
Headquarters
2900 Auburn Ct.
Auburn Hills, MI 48326
Assembly
561 S Fairfield Ave
Juneau, WI 53039
Contact Customer Service
Monday - Friday, 9am - 7pm EST
1-877-250-7729 or [e-mail]
Replacement Liner Installation Guide
Visit www.support.litter-robot.com for installation videos.
Fig. 11 Fig. 12
Fig. 13