User manual

E BEAM
User Manual & Modem Installation Guide
© whirlwind
Specifications subject to change without notice
6
LED Descriptions
LED Description
Power Green when connected to a power
source.
100Mbps Amber when a proper link is
established and the units are
connected at 100 Mbps. When off, it is
operating at 10 Mbps.
Fault Red when an internal firmware fault is
detected in the modem.
Safety Red when a heater/safety interlock
circuit fault has occurred. This means
that the laser source inside the modem
is turned off, and the lens heater will
not work.
Fiber Data Will flicker amber when data is being
transmitted.
Fiber Link Green when a connection is detected.
Ethernet Data Will flicker amber when data is being
transmitted.
Ethernet Link Green when a connection is detected.