System information

89
Compile Error Messages
Validation of the Topology Map
Message
: The Automatic Mixer (object code '__') at [__,__] has no active audio output.
Explanation
: An Auto Mixer Main Output is connected to a Mix-Minus Combiner
input, but appropriate audio output connections have not been made.
Mix-Minus Combiners allow Auto Mixers to share
control data only, and do not support audio input or output.
Message
: Unintended use of Combiner block detected.
Explanation
: A source, other than an Auto Mixer Main Output, is connected to a
Mix-Minus Combiner input. Mix-Minus Combiners allow Auto Mixers to share
control data only, and do not support audio input or output.
Message
: The main output of an Auto Mixer is connected to more than one
Combiner block.
Explanation
: The main output of an Auto Mixer can be connected to only a single
Combiner input (Mix-Minus or Room). Otherwise, Auto Mixer control
data might be shared with multiple groups of combined mixers, causing
convoluted behavior.
Message
: Empty layout !
Explanation
: No objects have been placed in the layout.
Messages
: There are no audio sources or destinations.
There are no audio sources.
There are no audio destinations.
Explanation
: No audio input/output objects have been placed (or connected) in the
layout.
Messages
: Some DSP blocks do not have inputs. Ignore them ?
Some DSP blocks do not have outputs. Ignore them ?
Some DSP blocks are not connected to any audio output. Ignore
them ?
Explanation
: These messages appear only if the flag 'Prompt To Stop Compilation
On Warnings' is set under Tools>Options>Compile. If the choice to
'Ignore' is selected, then the warning "Ignored '...' (object code '...') at
[__, __]" will be listed in the compile results. If the 'Prompt To Stop
Compilation On Warnings' flag is not set, then compilation proceeds
and 'Ignores' automatically.