System information

81
Diagnostics
These Component Objects provide Transfer Function displays for diagnostic purposes. Transfer Function may be
connected between any two component outputs on the same signal path, for a comparative analysis of processing.
Once a Component Object is placed into the Layout, all available settings can be accessed by double-clicking over the
object. This produces a Control Dialog Box, which displays the component controls in a more conventional user
interface.
see Transfer Function Control Dialog
Right-clicking over the object provides a pop-up menu of options.
Control Dialog
Transfer Function
Transfer Function may be connected between any two component outputs on the same signal path, for a comparative
analysis of processing. Gain displays the difference in frequency response between the two comparison points, as a
white line. Phase displays the phase relationship between the two comparison points, as a green line. Unwrap
removes out-of-range phase rotations from the phase display. Delays adds the effect of user-placed delay blocks
(Delay and Matrix Mixer w/ Delay) into the phase display. The Phase display does not indicate inherent propagation
delay within the system. Propagation delay is indicated separately at the bottom of the dialog box (1/3mS hops, if not
compiled...or...real-time including equalization delay, if compiled). When a Transfer Function dialog box is open, the
associated signal path is indicated as a dashed red line in the layout.