System information

79
RMS Meter Control Dialog
An RMS-reading meter & numeric display indicate signal level. Hold Time
determines how long the meter will display the most recent level increase. Hold
Enable turns the Hold Time function on/off. Indefinite Hold causes the Hold
function to be continuous, updating the display only when levels increase
beyond the current reading. Identifier provides a custom label, when dialog
box is minimized (see below).
Right-clicking over certain settings will provide a menu of additional options.
Control Dialog Boxes for Meters components can be minimized to create user
control surfaces (see Customizing Component Objects).
Generators
These Component Objects provide sine-wave, sweep, pink-noise, and white-noise generator functions. Generators
may be connected to any component input, and may be used for diagnostic and setup purposes, or for applications
which require tones or sound-masking.
Once a Component Object is placed into the Layout, all available settings can be accessed by double-clicking over the
object. This produces a Control Dialog Box, which displays the component controls in a more conventional user
interface.
see Tone Generator Control Dialog
see Pink Noise Generator Control Dialog
see White Noise Generator Control Dialog
Right-clicking over the object provides a pop-up menu of options.