System information

54
Equalizers
These Component Objects provide both graphic and parametric equalization, as well as feedback suppression.
Equalizers may be connected between any components within the Layout, for applications which require room
equalization, tone adjustment, or feedback control. Equalizers are available in pre-defined configurations, however,
the configuration may be customized when being placed from the Object Toolbar.
Once a Component Object is placed into the Layout, all available settings can be accessed by double-clicking over the
object. This produces a Control Dialog Box, which displays the component controls in a more conventional user
interface.
see Graphic Equalizer Control Dialog
see Parametric Equalizer Control Dialog
see Feedback Suppressor Control Dialog
Right-clicking over the object provides a pop-up menu of options.
Control Dialog
Graphic Equalizer Control Dialog
Active Band selects the current band to be adjusted. Center Freq. displays the center frequency for the current band.
Gain adjusts the amount of cut or boost applied at the center frequency for the current band. Active Band and Gain
may also be adjusted by dragging the band controls shown inside the graph. The selected band control becomes
yellow, and dragging it up/down affects Gain for that band. Flatten Band & Flatten All change the band(s) Gain to '0'
(flat). Bypass Band & Bypass All disable the band(s) without changing settings. Drag Points turns on/off the band
controls, revealing the resultant curve only.
Right-clicking over certain settings will provide a menu of additional options.