System information

49
CobraNet Output Control Dialog
Mute Out turns the output signal on/off. Level Out adjusts the relative output
volume. Invert Out reverses the polarity of the output signal.
CobraNet Bundle assigns digital audio data to a particular bundle. CobraNet
Bundle Numbers are used to match those of any external third-party CobraNet
D/A converters being used in the system (see DCS88 and E Snake). Normally,
'unicast' bundles 256 ~ 61,439 are selectable. These are device specific bundles
(for exchange of digital audio with only one other device). Multicast allows
selection of bundles 1 ~ 255, which are not device specific (for exchange of
digital audio with multiple devices). Enable turns on/off the exchange of
CobraNet digital audio data from this device.
Note: CobraNet Output blocks now include an Internal Propagation Delay fiel
d
to assist in delay equalization of audio signals going through third-party
CobraNet input devices. The propagation delay through the E Desk system,
the CobraNet transmission delay (according to the currently selected CobraNet
Latency) and the internal propagation delay in the third-party equipment will be
correctly taken into account.
The "Default" setting for this field only takes into
account the propagation delay through the E Desk system (0.67 ms).
Right-clicking over certain settings will provide a menu of additional options.