System information

48
CobraNet Input Control Dialog
Adjust external signal source so Peak In flashes only occasionally (6dB
headroom). Mute In turns the input signal on/off. Level In adjusts the
relative input volume. Invert In reverses the polarity of the input signal.
CobraNet Bundle assigns digital audio data to a particular bundle number.
CobraNet Bundle Numbers are used to match those of any external third-
party CobraNet A/D converters being used in the system (see DCS88 and E
Snake). Normally, 'unicast' bundles 256 ~ 61,439 are selectable. These are
device specific bundles (for exchange of digital audio with only one other
device). Multicast allows selection of bundles 1 ~ 255, which are not
device specific (for exchange of digital audio with multiple devices).
Enable turns on/off the exchange of CobraNet digital audio data from this
device.
Note: CobraNet Input blocks now include an Internal Propagation Delay
f
ield to assist in delay equalization of audio signals going through third-
p
arty CobraNet output devices. The propagation delay through the E Desk
system, the CobraNet transmission delay (according to the currently
selected CobraNet Latency) and the internal propagation delay in the third-
p
arty equipment will be correctly taken into account. The "Default" setting
f
or this field only takes into account the propagation delay through the E
Desk system (0.67 ms).
Right-clicking over certain settings will provide a menu of additional
options.