System information

47
MLO Output Control Dialog
MLO (Mic/Line Output) blocks are similar to CobraNet Output blocks, except they
are designed for use with E Snake hardware specifically and, therefore,
automatically allow for Internal Propagation Delay. CobraNet Output blocks may
be used with E Snake hardware, but Internal Propagation Delay must be manually
set (0.67mS).
Mute Out turns the output signal on/off. Level Out adjusts the relative output
volume. Invert Out reverses the polarity of the output signal.
CobraNet Bundle assigns digital audio data to a particular bundle. CobraNet
Bundle Numbers are used to match those of the actual DCS88 hardware being used
in the system. Normally, 'unicast' bundles 256 ~ 61,439 are selectable. These are
device specific bundles (for exchange of digital audio with only one other device).
Multicast allows selection of bundles 1 ~ 255, which are not device specific (for
exchange of digital audio with multiple devices). Enable turns on/off the exchange
of CobraNet digital audio data from this device.
Right-clicking over certain settings will provide a menu of additional options.