System information

46
MLI Input Control Dialog
MLI (Mic/Line Input) blocks are similar to CobraNet Input blocks, except
they are designed for use with E Snake hardware specifically and, therefore,
automatically allow for Internal Propagation Delay. CobraNet Input blocks
may be used with E Snake hardware, but Internal Propagation Delay must be
manually set (1.67mS).
Adjust MLI input trim (gain) controls so that Peak In flashes only
occasionally (6dB headroom). Mute In turns the input signal on/off. Level
In adjusts the relative input volume. Invert In reverses the polarity of the
input signal.
CobraNet Bundle assigns digital audio data to a particular bundle number.
CobraNet Bundle Numbers are used to match those of the actual DCS88
hardware being used in the system. Normally, 'unicast' bundles 256 ~ 61,439
are selectable. These are device specific bundles (for exchange of digital
audio with only one other device). Multicast allows selection of bundles 1 ~
255, which are not device specific (for exchange of digital audio with multiple
devices). Enable turns on/off the exchange of CobraNet digital audio data
from this device.
Right-clicking over certain settings will provide a menu of additional options.