System information

45
DCS88 Output Control Dialog
DCS88 Output blocks are similar to CobraNet Output blocks, except they are
designed for use with DCS88 hardware specifically and, therefore, automatically
allow for Internal Propagation Delay. CobraNet Output blocks may be used with
DCS88 hardware, but Internal Propagation Delay must be manually set (0.33mS).
Mute Out turns the output signal on/off. Level Out adjusts the relative output
volume. Invert Out reverses the polarity of the output signal.
CobraNet Bundle assigns digital audio data to a particular bundle. CobraNet
Bundle Numbers are used to match those of the actual DCS88 hardware being used
in the system. Normally, 'unicast' bundles 256 ~ 61,439 are selectable. These are
device specific bundles (for exchange of digital audio with only one other device).
Multicast allows selection of bundles 1 ~ 255, which are not device specific (for
exchange of digital audio with multiple devices). Enable turns on/off the exchange
of CobraNet digital audio data from this device.
Right-clicking over certain settings will provide a menu of additional options.