System information

44
DCS88 Input Control Dialog
DCS88 Input blocks are similar to CobraNet Input blocks, except they are
designed for use with DCS88 hardware specifically and, therefore,
automatically allow for Internal Propagation Delay. CobraNet Input blocks
may be used with DCS88 hardware, but Internal Propagation Delay must be
manually set (1.00mS).
Adjust DCS88 input trim (gain) controls so that Peak In flashes only
occasionally (6dB headroom). Mute In turns the input signal on/off. Level
In adjusts the relative input volume. Invert In reverses the polarity of the
input signal.
CobraNet Bundle assigns digital audio data to a particular bundle number.
CobraNet Bundle Numbers are used to match those of the actual DCS88
hardware being used in the system. Normally, 'unicast' bundles 256 ~ 61,439
are selectable. These are device specific bundles (for exchange of digital
audio with only one other device). Multicast allows selection of bundles 1 ~
255, which are not device specific (for exchange of digital audio with multiple
devices). Enable turns on/off the exchange of CobraNet digital audio data
from this device.
Right-clicking over certain settings will provide a menu of additional options.