System information

Equipment Room

An Equipment Room of available Component Objects is displayed, at the

lower-left of the main screen. The Component Objects are organized in the

following categories: Input Output; Mixers; Equalizers; Filters; Crossovers;

Dynamics; Routers; Delays; Controls; Meters; Generators; and

Diagnostics.

Once a category is selected, the pre-defined components available from that

category will be displayed underneath the category heading. A vertical

scroll bar will appear on the right if the available components cannot all be

displayed. To place a Component Object, simply drag & drop it into the

Layout at the desired location. Customized and grouped components may

be added to the Equipment Room (see Customizing Component Objects).

The Equipment Room may be closed, thereby increasing the width of the

Layout, and components can instead be selected from the Object Toolbar.

The Object Toolbar also allows configuration of some components, as they

are placed into the Layout.

To close the Equipment Room, left-click on the 'X' in the upper-right

corner. The Equipment Room can again be opened by selecting any

component category from the Equipment Room Menu. The Equipment

Room can also be opened/closed from the View Menu.

Right-clicking over the Equipment Room provides a pop-up menu of

options. The location and shape of all toolbars, including the Equipment

Room, may be changed to fit the user's preference.

Object Toolbar

The Object Toolbar, located directly above the Layout, allows Component Object selection for placement into the

Layout. The Component Objects are organized in the following categories: Input Output; Mixers; Equalizers; Filters;

Crossovers; Dynamics; Routers; Delays; Controls; Meters; Generators; Diagnostics; and Specialty.

Each category is represented by an icon, with a drop-down menu to the right. To place a Component Object, first

choose the appropriate category, then select the desired component from the drop-down menu. Once the component

has been selected, simply left-click at the desired location on the Layout. Left-clicking a category icon will select the

component which occurs first in the menu list. When using the Object Toolbar to place components into the Layout,

certain components will present the user with a pop-up window of configuration options.