Specifications

8
USING YOUR WASHER
STARTING YOUR WASHER (CONT.)
Stopping/restarting your washer
•
To pause the washer at any time, push the
Start/Pause button. The Cycle Status lights will
flash while the washer cycle is paused. If left in
pause, the cycle will terminate after 2 hours.
•
To restart the washer, close the lid (if necessary)
and push the Start/Pause button.
•
To cancel cycle, turn Cycle Selector knob to Off.
Cycle Status lights will turn off.
NOTE: When lid is opened during a cycle, all
machine operation will stop. Cycle will resume
when lid is closed.
8. Turn the Cycle Selector knob to the desired
wash cycle. See “Selecting a
cycle and time” later in this
section.
9. Push the Start/Pause button to start the
washer.
NOTE: The Cycle Selector
knob will NOT rotate as the
cycle progresses.
• The Cycle Status lights
indicate the operation being
performed within the cycle.
• When the cycle is com-
plete, all Cycle Status lights
will be Off.
NOTE: To change a cycle selection after the
cycle has started, turn the Cycle Selector
knob to Off, then select a new cycle.
LOADING
Loading suggestions
For these suggested full-sized loads, set the Water Level selector to the highest setting.
COMPACT WASHERS
Permanent Press
6 shirts
– or –
2 double sheets
2 pillowcases
– or –
2 single sheets
2 pillowcases
Knits
2 slacks
2 shirts
– or –
3 dresses
Delicates
1 camisole
2 slips
2 panties
2 bras
1 nightie
1 half slip
Mixed Load
1 pair slacks
2 pillowcases
2 shirts
1 T-shirt
Heavy Work Clothes
3 work shirts
2 pair pants
Towels
9 bath towels
– or –
6 bath towels
3 hand towels
6 wash cloths