Specifications

16
TROUBLESHOOTING
COMMON WASHING PROBLEMS (CONT.)
Solution...
•
Add fabric softener to the fabric soft-
ener dispenser. Do not drip fabric
softener on clothes.
•
Install an iron filter.
•
Use enough detergent to remove soil
and hold it in suspension.
•
Sort dark clothing from whites and
lights.
•
Unload the washer as soon as it
stops.
•
Unload the washer as soon as it
stops.
•
Use the Permanent Press cycle
(if available) to reduce wrinkling.
•
Loads should move freely during
wash. Wash smaller loads.
•
If safe for fabric, use warm or hot
wash water. Use cold rinse water.
•
Reverse hoses.
•
Loads should move freely during
wash. Wash smaller loads.
•
Do not wrap items around agitator.
•
Sort dark clothes from whites and
lights.
•
Use hot or warm washes, if safe for
fabric. Hot water should be at least
111°F (44°C) to clean heavy or
greasy soils.
•
Use more detergent for washing
heavy soils in cold or hard water.
•
Use more detergent when washing
in hard water.
Cause...
•
Improper use of fabric softener.
•
Iron (rust) in water.
•
Not enough detergent used, causing soil
to be redeposited.
•
Dye transfer due to not sorting loads
properly.
•
Dye transfer due to not unloading
washer promptly.
•
Not removing load promptly.
•
Wrong cycle for fabrics being washed.
•
Overloading.
•
Wash water not warm enough to relax
wrinkles. Using warm rinses.
•
Hoses reversed.
•
Overloading.
•
Clothes wrapped around agitator.
•
Dye transfer.
•
Wash temperature too low.
•
Not enough detergent.
•
Hard water.
Problem...
Stains on load
Load is wrinkled
Load is
tangled/twisted
Gray whites,
dingy colors