Operating instructions

Porcher, 6615 West Boston Street, Chandler, AZ 85226 8
CAUTION: Baths are extremely heavy.
For personal safety, always use extra personal for installation.
STEP 2. Carefully position bath in framing, the feet should be shimmed accordingly, so that he rim of the
bath contacts the leveling stringers, or pier, but supports no weight. Any finished material, such as tile or
wallboard, must be self-supporting if it contacts the rim of the bath. Mount drain and overflow fittings to
bath and connect assembly and house drain with tee and hand tighten EZ-nut. See diagram below.
Overflow
Tee With EZ-nut
Drain
STEP 3. Mount handle adapter and snap on turn handle to bath. For brass handle installation use 5/32”
hex key. Adjust pop-up to min. 1/2” opening. See diagram below.
Handle Adaptor
Turn Handle
1/2" [1.3cm]