Technical data

Z1209004. 5 GB

Enjoy the RIHO life-style

Whirlpool Electronic LCD user handbook

1.5 Bath installation:

- A metal support frame with 4 or more adjustable legs will be supplied with the bath. The adjustable legs will be

provided separately, depending on the packing method. If necessary the legs must be installed (see fig.2, leg

installation diagram). With the adjustable legs, ensure that the bath is properly levelled and at the right height and do

not forget to tighten the lock nuts afterwards. Check to ensure that all the legs are resting properly on the floor.

Diagram fig. 2

- If necessary, install the overflow-drain combination in the bath. Check whether all the components are properly

mounted according to the attached installation specifications of the manufacturer.

- The bath may be fixed on the wall with a wooden lath (see Fig. 3 wall mounting) or using the clips provided

(alternative) that are fixed to the wall as shown on the next page. This mounting method is valid for installing the bath

against tiles It is not advisable to have the tile edge on the bath as this could make access to installed mechanical and

electrical components difficult.

- Level the bath properly.

- Connect the bath to the drain pipeline.

Diagram fig. 3

-33--32-