Technical data

ManualsBrandsWhirlpool ManualsCooktopKR-32

Z1209004. 5 GB

Enjoy the RIHO life-style

Whirlpool Electronic LCD user handbook

Installation and Operations Manual RIHO baths (whirlpools)

Contents

Chapter Description Page.

1.0 Installation of RIHO baths (whirlpools) .30

1.1 Safety regulations for bathrooms. .30

1.2 Whirlpool installation .31

1.3 Delivery .31

1.4 Pre-installation actions .31

1.5 Bath installation .32

1.5.1 Ventilation grid .35

1.5.2 Inspection hatch(es) .35

1.5.3 Panels .35

1.5.4 Hot and cold water supply .36

1.5.5 Water drain .36

1.5.6 Electrical connection .36

1.5.7 Potential difference equaliser .36

2.0 RIHO acrylic baths (Whirlpools) .37

3.0 Maintenance .37

4.0 Operation .38

4.0.1 Display indicators .39

4.1 Basic functions .40

4.1.1 Hydro system .40

4.1.2 Ground system .40

4.1.3 Pulsation positions .40

4.1.4 Diverse options .41

4.1.5 Heating option .41

4.1.6 Cleanpool option .42

4.1.7 CLeanpool and run dry. .43

4.2 Menu functions .43

4.2.1 Short menu (select menu options) .43

4.2.2 Extended menu (user programmer options) .45

5.0 Whirlpool jets .49

5.1 Aero jets .49

5.2 Hydro jets .49

5.2.1 Hydro back- and side jet .49

5.2.2 Hydro Super jet .49

5.2.3 Thermae Powerpool rotation jet .49

5.2.4 Thermae Powerpool jet .49

6.0 Protection system .50

6.1 Normal temperature of bath water .50

6.2 Disinfection and cleaning .50

6.3 Tips for Users .51

7.0 Exceptional maintenance .51

8.0 Service Request Form .52

9.0 Guarantee Terms and Conditions .54

10.0 Technical data

10.1 Main power connections 3-motor system with or without heater (Thermae)

Main power connections 2-motor system with heater + LCD (Riho Line)

10.2 Whirlpool connections

10.3 Radio (optional)

10.4 Dipswitches

10.5 Error codes

-28- -29-

Summary of content (28 pages)

PAGE 1
GB -28Z1209004.
PAGE 2
GB Whirlpool Electronic LCD user handbook Installation and Operations Manual RIHO baths (whirlpools) Chapter Description Page. 1.0 Installation of RIHO baths (whirlpools) 1.1 Safety regulations for bathrooms. 1.2 Whirlpool installation 1.3 Delivery 1.4 Pre-installation actions 1.5 Bath installation 1.5.1 Ventilation grid 1.5.2 Inspection hatch(es) 1.5.3 Panels 1.5.4 Hot and cold water supply 1.5.5 Water drain 1.5.6 Electrical connection 1.5.7 Potential difference equaliser .30 .30 .31 .31 .31 .32 .
PAGE 3
1.0 Installation of Riho Whirlpools The Whirlpool baths are fully in conformity with the applicable EN and national guidelines. The installation must be fitted by a recognised installer. The assembly and installation of the whirlpool must be done in accordance with the instructions described in this manual. The installer will be responsible to check that the civil, electrical and water-related pre-installation work is done properly. 1.1 Safety regulations for bathrooms.
PAGE 4
GB Whirlpool Electronic LCD user handbook 1.2 Whirlpool installation All Riho Whirlpool baths are made of acrylic (see description: acrylic baths) and equipped with a Whirlpool bath as per customer's choice. Please refer to the Riho price lists for details of all options. 1.3 Delivery: Generally, all whirlpool systems are fully installed, functionally tested and packed. ! ATTENTION! Before installation, check the bath for damage, as well as material and/or manufacturing defects.
PAGE 5
1.5 Bath installation: - A metal support frame with 4 or more adjustable legs will be supplied with the bath. The adjustable legs will be provided separately, depending on the packing method. If necessary the legs must be installed (see fig.2, leg installation diagram). With the adjustable legs, ensure that the bath is properly levelled and at the right height and do not forget to tighten the lock nuts afterwards. Check to ensure that all the legs are resting properly on the floor. A GB A Diagram fig.
PAGE 6
GB Whirlpool Electronic LCD user handbook 1 GB 2 3 O H IR I O O / H IR I O / 3 -33Enjoy the RIHO life-style
PAGE 7
GB -34Z1209004.
PAGE 8
GB Whirlpool Electronic LCD user handbook - Fill half the bath with water and check whether the bath is still horizontal. This is necessary. Use the adjustable legs for correction. Check whether the drain pipeline connection is watertight and then top up the bath up to the overflow outlet. Allow the same to overflow and check the sealing and proper drainage of water via the overflow connection. - The open sides of the bath may be finished with plastic panels or with a tile wall.
PAGE 9
O IH R I/ O O IH R Elektrická skříňka Elektrická skříňka I/ O GB Figure 5 Inspection hatch(es). 1.5.4 Hot and cold water supply. The supply pipelines may be installed on the rim of the bath or on the wall for connection to the bath tap. A drainage overflow installation with water supply can also be supplied. Ask your dealer for Riho overflow-drain combinations with water supply in the bath.
PAGE 10
GB 2.0 Whirlpool Electronic LCD user handbook Riho Acrylic (PMMA) baths (Whirlpools) All Riho baths are made of acrylic (polymethyl methacrylic) and supported in the bottom with chipboard and reinforced with glass fibre polyester. Acrylic is a plastic and coloured all the way through. The properties of acrylic provide the user with the maximum bathing comfort, provided the appropriate installation and maintenance instructions are duly followed. 3.
PAGE 11
4.0 Operation 19°C 12:10 OK GB Do not touch, handle or use electrical devices when using the whirlpool. This is extremely dangerous to the user. When at rest the LCD screen must show the RIHO logo. After 30 minutes without use the background lighting will switch off. 19°C 12:10 Before starting the Whirlpool bath, fill the bath to 5 cm above the highest jet (hydro-system) and to about 15 cm below the rim (aero-system). The bath indication will then show full.
PAGE 12
GB 4.0.1 Whirlpool Electronic LCD user handbook Display indicators. 19°C time indication CD AM FM 12:10 GB 1 2 audio indication Light\colour therapy level indication User selection Water temperature The first row of the display shows the indicators. The various indicators on the display depend on the options and system that you have purchased.
PAGE 13
4.1 4.1.1 Basic functions Hydro-system. This pushbutton is used to switch the hydro system on and off. - Short press, switch system on/off. - Long press, see user options In the case of the hydro-whirlpool system with back and foot jets that are separately connected by a valve, or are controlled by a pump, the button can be used to move through the various combinations one after the other. 19°C 12:10 19°C 12:10 GB 4.1.2 Ground system. This pushbutton is used to switch the ground system on and off.
PAGE 14
GB 4.1.4 Whirlpool Electronic LCD user handbook Diverse options - Light function option. Switch on only if there is sufficient water (bath full indication ). The light will switch on after pressing the light pushbutton once. The light function will switch off after 20 minutes. If the light function is on and the water level drops (2 seconds), the light function will switch off.
PAGE 15
4.1.6 Cleanpool option. GB If both buttons are pressed simultaneously for two seconds the cleanpool function starts, provided that the level indication shows full and there is sufficient liquid in the reservoir and no other function is active (no light). All jets must be completely under water. 1: Display shows clean function and countdown timer. 2: After 8 seconds all motors and valves are switched on. The motor of the aero-system on the other hand switches alternately on and off (20 seconds.
PAGE 16
GB 4.1.7 Whirlpool Electronic LCD user handbook Run dry function If both buttons are pressed down simultaneously for 2 seconds the run dry function starts if there is “no” water in the bath (bath empty indication ). The following occurs automatically: - The display shows the run-dry function. - The shut off valve opens after 5 seconds - The hydro motors will be switched on for a few seconds. - The aero-motor will be switched on for 45 seconds. - The motors then stop and the display shows RIHO again.
PAGE 17
Stop all functions User selection Audio FM/AM/CD heating T Turbo O Exit (close menu) With the or button you can select another function. As soon as the correct setting is shown you can select this function with the button. OK OK GB Stop all functions: Hydro, ground system and light etc switch off. User selection (user1 to 6): This function is used to select pre-programmed system settings. You can, for example, set your own personal pulsation position, set light selection, etc.
PAGE 18
GB Whirlpool Electronic LCD user handbook Heating: If your system has a heating unit then the water temperature is displayed in the upper left corner or the LCD screen. It is not possible to switch the heating unit on without the first hydro pump running. 19°C 12:10 19°C ok OK 12:10 19°C 12:10 ok OK 35 C 35 C OK ok OK T GB exit heating menu (heating on) set temperature exit heating menu (heating off) Exit (close menu) 4.2.2 Extended menu (user programmer options).
PAGE 19
Set user: If you program a user then only the programmable/settable functions will be part of your system For example, if you have no radio, then this will not be displayed on the LCD screen. The system allows you to program 6 users. 19°C 12:10 19°C 12:10 2 3 ok 4 ok OK GB The following maximum number of settings are possible for each user.
PAGE 20
GB Whirlpool Electronic LCD user handbook Switch halogen lighting on/off If you are on the required selection you can switch the option on or off by pressing the symbol changes to . ( -off, -on) 19°C 2 12:10 Reset ok 19°C 2 OK button. The 12:10 RESET OK ok Switch colour therapy on/off. 2 12:10 2 19°C 12:10 ok OK GB 19°C ok Set audio (see also short menu). 12:10 ok FM 12:10 87 mhz OK Vol 2 ok 12:10 OK OK 2 Vol ok OK OK FM Set heating (see also short menu).
PAGE 21
Your whirlpool can be supplied with valve functions in the hydro system or with pump-controlled outputs. Depending on the system chosen. Valve control Switch minijets on/off (valve function) Valve controlled jet outputs Switch foot jets on/off (valve function) Switch back jets on/off (valve function) Set your preference, e.g.
PAGE 22
GB Whirlpool Jets 5.1 Aero jet The aero jet has a chrome surface finish. To clean the jet, the inner part can be taken out with a small screwdriver. As the word Aero already indicates, this is a jet for air flow. The air swirls through the water, which gives a relaxing effect. The air from the aero jet opening enters the bath with a certain speed. This may be perceived as cold. The jet house itself becomes somewhat hot. BE AWARE: Be very careful not to damage the chrome surface.
PAGE 23
6.0 Protection system If there is insufficient water in the bath, the system will not switch on in order to prevent the pumps running dry. In addition all motors are fitted with a thermal switch. These will switch off the motors in the event of problems. 6.1 Normal temperature of bath water. The recommended normal temperature of bath water is 38°C. 6.2 Disinfection and cleaning.
PAGE 24
GB 6.3 Whirlpool Electronic LCD user handbook Tips for users - In case of health problems: Consult your doctor before using the whirlpool system. - The maximum recommended duration for using the whirlpool is 10 minutes. - The whirlpool system should not be used immediately after a meal. - Bath foam (bubble bath), shampoos or soap should only be used after using the whirlpool system.
PAGE 25
Problem 3. The cleanpool system does not work. Cause 1: No cleanpool fluid in the reservoir. Solution 1: Top up cleaning fluid Cause 2: No cleaning fluid is retained in the reservoir because the reservoir shut off valve is open. Solution 2: Check lower magnetic valve on the cleanpool tank and fit new valve if necessary. If fitting new valve ring the service department. GB Problem 4. Light or colour therapy does not work. Cause: Water level not high enough (bath full indication )? Solution: Top up water.
PAGE 26
GB Whirlpool Electronic LCD user handbook Fig. 7 RIHO International b.v. Hermesstraat 10 5047 TS Tilburg Holland Postbox 4149 5004 JC Tilburg Holland Tel: Fax: +31 (0) 13 5728728 +31 (0) 13 5720262 ABN-AMRO bank Tilburg 52.25.29.054 Giro No. of ABN-AMRO bank 1091055 Chamber of Commerce No.
PAGE 27
9.0 Terms and Conditions of Guarantee 1 We provide a guarantee for the good construction and the material of the goods supplied by us, subject to the condition that we shall replace all components free of cost, which develop defects within three years of delivery due to inadequate construction and/or defective materials. The components in question should be sent to us free of cost for this purpose. We shall not bear the cost of dismantling or installing these components.
PAGE 28
Whirlpool Electronic LCD user handbook GB GB -55Enjoy the RIHO life-style